LH & RH Air Inlet Cowl Grille Panel 25820729 25820730 Windshield Wiper Cowl End Compatible with Chevy Chevrolet Avalanche 2007-2013 Suburban Tahoe GMC Yukon XL Cadillac Escalade ESV 2007-2014

🛠️ Installation Instructions: Quick and Easy DIY Installation in 7 Simple Steps 1. Prepare Your Tools Start by gathering the basic tools you’ll need, including a screwdriver, wrench, and potentially plastic trim removal tools to avoid damaging your vehicle’s components. 2. Remove the Wiper Arm Use a wrench to loosen the nut securing the wiper arm. Once loose, carefully lift the arm off the windshield. Be cautious to prevent the arm from falling back and possibly damaging the windshield. 3. Remove the Old End Cap Depending on your vehicle model, the end cap may be secured with screws, snap clips, or a combination of both. Use a screwdriver to remove the screws or use a plastic trim tool to gently release the clips. Pay attention to how the end cap is installed so you can correctly install the new one. Don’t forget to keep the screws and clips safe for reinstallation. 4. Clean the Installation Area After removing the old end cap, clean the mounting area thoroughly. Use a clean cloth or brush to remove dust, debris, and any leftover sealant. A clean, smooth surface ensures the new end cap fits perfectly and seals properly. 5. Install the New End Cap Align the new end cap with the mounting area and secure it in place. If it’s held by screws, tighten them securely—but avoid over-tightening to prevent damage to the cap or your vehicle. If it’s secured with clips, ensure they snap in firmly. 6. Reattach the Wiper Arm Position the wiper arm back onto its original spot, then tighten the retaining nut. Check the arm’s position and ensure it moves freely without obstruction. 7. Check the Seal & Functionality After installation, check the seal between the end cap and the vehicle to ensure there are no gaps or looseness. You can test the drainage by spraying water over the windshield to ensure it flows smoothly. Also, activate the wiper to check that it functions properly without interference from the end cap. Pro Tip: Take a quick photo of the old end cap before removal. It can help you align the new cap more easily during installation!

• Compatible with OEM part numbers 25820729 and 25820730.Please verify the part number on your original component prior to purchase, as fitment cannot be guaranteed for all vehicles. Vehicle Fitment: This windshield wiper cowl end compatible with Avalanche 2007-2013 Suburban 2007-2014 Tahoe 2007-2014;Yukon 2007-2014 Yukon XL 2007-2014;Escalade 2007-2014 Escalade ESV 2007-2014.
• Premium Materials: Air Inlet Cowl Grille Panel manufactured from high-strength automotive-grade PP plastic, this cowl end panel offers a lightweight yet durable construction.It is engineered to resist cracking, fading, and deformation, making it suitable for enduring harsh weather conditions, prolonged UV exposure, and daily driving stress.Its durability and impact resistance meet or exceed original equipment manufacturer (OEM) standards.
• Protective Coverage: Designed to provide a secure seal, this panel effectively blocks rain, dust, and road debris from entering the engine compartment. It helps safeguard the engine bay and interior from moisture and dirt accumulation, thereby reducing the risk of damage to electrical systems and other essential components.Additionally, it covers critical areas such as the wiper transmission and motor, protecting them from environmental factors like rain, leaves, and dust. This enhances the longevity of the wiper system and minimizes long-term maintenance requirements.
• Customer-Backed Support: We support every product with reliable and responsive customer service. Should you encounter any issues related to installation or product quality, our dedicated team is available to provide assistance.